| Power Off Memory |
Support |
| Idle Motion |
Activate Preset/ Scan/ Tour/ Pattern if there is no command in the specified period |
| Protocol |
SN-SD, Pelco-D |
| Video and Audio |
| Compression |
H.265, H.264, MJPEG |
| Frame Rate |
Main Stream:
Thermal: D1 @25/30fps
Visible: 1920×1080/1280×720 @25/30fps |
| Sub Stream:
Thermal: CIF @25/30fps
Visible: D1/VGA/640×360/CIF/QCIF/QVGA @25/30fps |
| Bit Rate Control |
CBR/VBR |
| Bit Rate |
Thermal: 100Kbps~6Mbps
Visible:
main stream: 500Kbps~12Mbps;
sub stream: 100Kbps~6Kbps |
| Region of Interest |
Off / On (8 Zone, Rectangle) |
| Electronic Image Stabilization(EIS) |
N/A |
| Digital Zoom |
16x |
| Mirror |
Support |
| Defog |
Support |
| Motion Detection |
Support |
| Privacy Masking |
Off / On (4 Area, Rectangle) |
| DVE Image Enhance |
Support |
| Audio Compression |
G.711, AMR, RAW_PCM (Optional) |
| Intelligence |
| Intelligent Functions |
Motion detection, Disk alarm, I/O alarm, Temperature alarm |
| IVS |
Perimeter ,Single Virtual Fences ,Double Virtual Fences ,Object Left ,Object Removed |
| Temperature Detection |
| Temperature Detection |
Point detection, Area detection |
| Temperature Alarm |
Over temperature alarm, Temperature difference alarm |
| Precision |
Max (±2℃, ±2%) |
| Detection Area |
Support 8 areas (8 target) |
| Response Time |
≤30ms |
| Effective temperature working environment |
-10 °C ~ 55 °C (14°F ~ 131 °F) |
| Theory of temperature measurement range |
-30 °C ~ 200 °C (-22°F ~ 392 °F) |
| Temperature display mode |
Temperature target ＞5℃, Display absolute temperature value;
Temperature target ≤5℃, Display relative temperature value (temperature difference DEV = highest value – average) |
| NETWORK |
| Ethernet |
RJ-45 (10/100Base-T) |
| Protocols: |
IPv4/IPv6 ,HTTP,RTSP/RTP/RTCP, TCP/UDP, DHCP, DNS, PPPOE, SMTP, SIP ,802.1x |
| Interoperability |
ONVIF, CGI |
